NEC N8100-2834F, Руководство по обслуживанию

Страница: 67 / 138

6. Windows System Recovery
Express5800/R120h-1M, R120h-2M (3rd-Gen) Maintenance Guide
67
Chapter 1 Maintenance
6.2
Recovery of Windows Server 2016 / Windows Server 2012 R2
If the Windows does not start normally, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose
Repair your computer in Windows Setup
wizard . We recommend that this option is performed by the system administrator.
If the RAID controller driver is required, take the following steps:
Note In case you use an on-board RAID controller and an internal optical disc drive,
load the driver from a removable media.
Copy the following folder from Starter Pack DVD to a removable media
beforehand.
<DVD>: \software\006\drivers\sw_raid1_driver
1. Turn on the power to the display and this server in that order or restart.
Set the OS install media.
2. Press <F11> key during POST to start Boot Menu.
In
One-Time Boot Menu , select the optical disc drive to which OS install media is set.
3. Start the OS from the OS installation media.
The message "Press any key to boot from CD or DVD..." appears on the upper part of the screen.
To boot from the media, press the <Enter> key.
While boot-up proceeds, the message "Loading files..." appears.
4. Choose Repair your computer in Windows Setup wizard .
5. Click Troubleshoot .
6. Click Command Prompt .
7. After setting Starter Pack DVD to the drive, execute the following command to load the driver:
For on-board RAID controller:
Tips In case you use an on-board RAID controller or an internal optical disc drive, load
the driver from a removable media.
drvload <Removable Media>:\sw_raid1_driver\SmartDQ.inf
For RAID controller (N8103-189/190/191/192/193/194/195/201)
Tips The volume label for each drive can be checked from the display result of the dir
command.
Example: dir C:\
8. Exit the command prompt.
The driver installation is completed.
drvload <DVD>:\software\006\drivers\sw_raid1_driver\SmartDQ.inf
drvload <DVD>:\software\001\drivers\dac1_driver\SmartPqi.inf