E-33
Using the Viewer function
If you use the Viewer function on the LCD projector, you must
first install the optional MT Viewer board (VK-MT) in the
LCD projector and set up the exclusive software included with
the VK-MT kit.
See the user's manual included with the VK-MT for installing
and uninstalling the software.
Mounting the Optional MT Viewer Board
To install the Viewer board:
1. Set the LCD projector on end with the carrying handle up.
NOTE: Be sure to unplug the LCD projector before installing the Viewer
board.
2. Remove the two screws from the bottom.
3. Remove the slot cover by pushing up on the catch of the
cover with a flat-head screwdriver until you feel it detach.
4. Insert the optional viewer board into the slot. Be sure to
push the board until the board is securely fitted.
5. Secure the board in place with the two screws that you
removed in step 2.
6. Put the LCD projector back in the original position.
