English-28
Multi Display setting
You can display a image by using multiple monitors with any input signals.
[Example of V MONITOR 5, H MONITOR 5 (See page 20)]
1. Press the CENTER/EXIT key to display OSD menu.
2. Move the LEFT/RIGHT key left or right to select MULTI DISPLAY.
3. Move the DOWN/UP key down to select H MONITOR. Move the LEFT/RIGHT key left or right to set H MONITOR 5.
4. Move the DOWN/UP key down to select V MONITOR. Move the LEFT/RIGHT key left or right to set V MONITOR 5.
5. Move the DOWN/UP key down to select MONITOR NO. then set monitor number individually.
A monitor located at buttom left must be 1 (master monitor).
When you set monitor number to a monitor, please install the monitor at the same spot where assumed installation fi gure is
shown as black.
1
2
3
4
5
6
7
8
9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
6. Move the DOWN/UP key down to select TILE MATRIX ENABLE then set it to ON.
Set all connected monitors individually by following the above procedure from 1 to 6.
