NEC MultiProfiler, Руководство пользователя

Страница: 29 / 49

29 | MULTIPROFILER - USER’S GUIDE
Name Preset
The Name Preset page is shown if a Custom Picture Mode is selected on the first wizard page, and is used to select
which of the 3 or 5 available memory locations to use to store the custom mode settings, and to enter a custom name
for the mode.
Depending on the monitor model being used, there are either 3 or 5 available memory locations which can be selected
in this page. Note that the current settings in the selected memory location will be overwritten at the next stage, so
choose a memory location containing a Custom Picture Mode setting that you do not currently need.
The Custom Picture mode will be created in whichever of the 5 Picture Modes that was selected when the wizard was
started.
About Custom Picture Modes
There are 5 available Picture Modes that can be selected from the Picture Mode page in MultiProfiler.
Each of these Picture Modes can be customized to either be a preset (such as sRGB, or AdobeRGB),
or as a Custom mode.
Depending on the display model, there are either 3 or 5 memory locations in which to store Custom
modes. The MultiSync PA241W supports 3 or 5 (depending on production date), and all other PA
series models support 5.
If the display model supports 3 memory locations, then up to 3 of the 5 Picture Modes can be used
as unique Custom modes.
If the display model supports 5 memory locations, then each of the 5 Picture Modes can be used as
unique Custom modes.
It is also possible to have more than one Picture Mode using the same Custom mode, for example,
with different brightness settings.