NEC IPS-4000, Руководство пользователя

Страница: 19 / 73

The selection of the input equipment, which is output from the MONITOR
OUTPUT connectors when INPUT 7 (RGB) has been selected, will be the
selection of the monitor output.
<Remote Control Operation>
Each press of the MONITOR button part advances the selection one step in
the sequence of OFF INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 ,
and the signal is output from the MONITOR OUTPUT connectors. Each press of
the
button moves one step in the reverse direction.
<Main Unit Operation>
Main unit operations are the same as the operations of the remote control
MONITOR button
part.
INPUT1 S-VIDEO
ABC
INPUT SELECT
DEF GHI
JKL MNO PQR
STU
1 2 3
4 5 6
7
INPUT 1-5*
3
- INPUT1-5 INPUT 1-5*
3
- INPUT S1,S2*
2
INPUT S1,S2*
2
INPUT S1,S2
INPUT 1, 2* 1 INPUT S1,S2* 1 INPUT S1,S2* 1 INPUT S1,S2
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6 MONITOR
OUTPUT
OUTPUT INPUT7
Selection of the Input Signal
These buttons select the equipment connected to the INPUT connectors of this
unit.
Select the input equipment by pressing the main unit INPUT buttons 1 through 7.
(Buttons 8, 9, and 0 do not have a function.)
When INPUT 7 (RGB) has been selected, the output from the MONITOR
OUTPUT connector will permit selection of INPUT 1 through 5 and OFF with the
MONITOR button.
When a selection has been made, the information will be displayed on screen for
about 5 seconds.
Selection of the Monitor Output
MONITOR
Input Signal MONITOR OUTPUT
VIDEO Input S-VIDEO Input VIDEO Output S-VIDEO Output
*
1
The S-VIDEO jack will be given priority for equipment to which a VIDEO input
signal and an S-VIDEO signal have been connected at the same time.
*
2
The S-VIDEO input signal of INPUT 1 and 2
will be output from the monitor output VIDEO
connectors.
* 3 The VIDEO input signals of INPUT 1 through
5 will also be output from the S-VIDEO con-
nector of the monitor output.
MAIN UNIT OPERATION
Table of Output to the MONITOR OUTPUT Connector when 7 Is Selected
18