PART NAMES AND FUNCTIONS
15
13. SHARPNESS Button
Adjusts the sharpness of the image quality.
14. TINT Button
Adjusts the tint.
15. MOTION Button
Selects the motion detection level and provides picture interpolation to the image.
Each press of the button advances the selection one step in the sequence of
<Still>
-2
-1
0
+1
+2 <Moving>.
16. STILL Button
Performs Y/C separation and scanning line interpolation suited to still pictures.
Each press advances the selection one step between ON
OFF.
17. NR Button
Used to reduce picture noise.
Each press advances the selection one step in the sequence of
OFF
1
2
3.
18. SPLIT Button
Sets the artificial interlace display to half the screen or the full screen. This is used to view the effects
of the scanning line interpolation.
Each press of the button advances the selection one step in the sequence of
OFF
HALF
ALL.
The unit should normally be used with this setting OFF.
19. V-APERTURE Button
Adjusts edge enhancement in the vertical direction.
Each press of the button advances the selection one step in the sequence of
0
1
2
3
4
5
6
7.
20. LCD Button
Switches on and off the LCD's back light. Each press advances the selection one step between
ON
OFF.
21. DISPLAY Button
Switches the on-screen display on and off. Each press advances the selection one step between
ON
OFF.
22. FORMAT Button
This button selects the format (resolution) of the output signal.
Each press of the button advances the selection one step in the sequence of
Double lines
Double field
Quadruple lines
800 x 600
1024 x 768.
(Model IPS-4000 doubles the lines and doubles the fields only.)
23. MONITOR Button
This button selects the monitor output at the time of selecting INPUT 7.
Each press of the button advances the selection one step in the sequence of
OFF
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5 .
24. NORMAL Button
Returns the image adjustment contents (COLOR, TINT, and SHARPNESS) to the initial setting
condition.
25. R, B Buttons
Used only for linked operation. (For service personnel only.)
26. Remote Control Jack
Insert the piug of the supplied remote cable here when the remote control is used in the wired
application.
