NEC iPASOLINK EX Advanced, Инструкция по эксплуатации

Страница: 661 / 793

4-50 CONTROL ITEMS
GGS-000548-01E iPASOLINK EX Advanced: Operation & Maintenance
4.7 Equipment Reset
Following describes the hardware (H/W) and firmware (F/W) Reset Control of
iPASOLINK EX/A.
Reset control is available only when the system is set in the Maintenance mode. If it
is not in the Maintenance mode, executing the reset control will result in the error
response. Following are the objects that are available to be reset, and some
precautions:
4.7.1 Reset H/W

Proceeding through the following procedure terminates the
WebLCT
and restarts
iPASOLINK EX/A.
Procedure 4-17
1. Click the
Maintenance
tool button on the tool bar of the
WebLCT
to put the
system into the Maintenance Mode. The MAINT indicator on the tool bar
changes to orange.
2. In the
MENU
frame on the left, expand the
Maintenance Control
, then expand
H/W F/W Reset Control
to select
H/W Reset Control
.
The
H/W Reset Control
window appears.
Module Description
H/W Reset Control Equipment Reset Resets the equipment hardware. Main
Ethernet signal will be interrupted during
the resetting process.
F/W Reset Control CPU Reset (RF) Resets CPU (Radio Frequency block FW).
Main signal will be interrupted during the
resetting process.
CPU Reset (BB) Resets CPU (Baseband block F/W). Main
Ethernet signals and NMS Communication
will be interrupted when the resetting
process.