1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
92
Chapter 2 Preparations
1.15
Connecting cables
This section shows an example of internal device cable connection.
1.15.1
Internal interface cables
This section describes the connection of internal interface cables.
Tips
The figure shown here primarily describes connections. For more information
about the connectors on the motherboard, refer to
Chapter 1 (5.4 Motherboard)
.
(1) Connecting Hard Disk Drives
This section describes how to connect additional Hard Disk Drives.
(a) In case of 3.5-inch Hard Disk Drive installed
When adding 3.5-inch Hard Disk Drives, connect the cables as in the following figure. Install the Hard Disk
Drives in order from the left side.
Connect the first Hard Disk Drive to SATA0, the second to SATA1.
•
When connecting to the miniSAS connector on the motherboard
A dedicated cable (K410-278(00)) is required.
You can use the controller on the motherboard to build a RAID System. For more information on the RAID
level you can build and then method for building RAID Systems, see
Chapter 2 (4. RAID System
Configuration)
in "
Maintenance Guide
".
Power
supply unit
Motherboard
SATA cable (for the optical disk drive)
Internal SATA cable (K410-278 (00))
Slot 0: First Hard Disk Drive
MINI SAS1
SATA4
Optical disk drive
3.5-inch HDD cage
(N8154-65F)
Slot 1: Second Hard Disk Drive
