1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
80
Chapter 2 Preparations
1.12.1
Installing a 3.5-inch HDD cage and hard disk drives
Install a 3.5-inch HDD cage in the server by using the following procedure.
1. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
Remove the side cover and front bezel by referring to
Chapter 2 (1.4 Removing the Side Cover
and
1.5 Removing the Front Bezel
).
3.
Insert the HDD cage into the HDD bay.
4.
Push the HDD cage so that its protrusions A
and B come fit into the grooves on the
chassis.
5.
Insert one side of the lock plate into the
groove of the chassis. Push the lock plate in
the direction shown by the arrow to lock the
HDD cage.
6.
Mount the HDD trays that come with the HDD
cage from both sides of the 3.5-inch hard disk
drive. Mount the tray marked "A" on the right
side, and the tray marked "B" on the left side.
Mount the hard disk drive so that its control
board faces upward.
The indication of "C
side" must face
