1. Installing Internal Optional Devices
Express5800/T110f-S User’s Guide
66
Chapter 2 Preparations
Installing the flash backup unit in the server
This section describes how to install this product in the server.
Getting ready to install the battery
1. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. While referring to
Chapter 2 (1.4 Removing the Side Cover
and
1.5 Removing the Front Bezel
,
remove the side cover and front bezel.
Installing the flash backup unit
1. Remove one screw from the front panel bracket.
2. Slide the front panel bracket slightly toward the right, and then pull the bracket toward the front
to remove it.
Important Be careful so that the cable does not come out from the connector when
pulling the front panel bracket.
Start
Preparation for installation
Connecting to RAID Controller
Finish
Installing the flash backup unit