2. System BIOS Setup
Express5800/GT110d User’s Guide
114
Chapter 3 Setup
2.4
Cases that Require Configuration
Only if a case applies to any of following cases, use the SETUP utility to change a parameter which was
configured as factory setting. Other than cases described below, do not change the settings. A list of SETUP
parameters and factory settings are described in
Chapter 2 (1. Details of System BIOS)
in "
Maintenance
Guide
".
Category
Description
To be changed
Remark
Change date and time
Main
System Date
Main
System Time
Configurable on OS
On/Off NumLock on power ON
Boot
Bootup Numlock State
Basic
On/Off the function to display
the NEC logo during POST
Boot
Quite Boot
Disabled
By pressing the <Esc> key,
prevent the display of the logo.
Optional
board
Install RAID Controller board
Advanced
PCI Configuration
PCI
Slot n Option ROM
Enabled
n
is PCI slot number of the
RAID Controller
Change the boot order of
devices
Boot
Boot Option Priorities
Change the boot priority
Use remote power on function
(from modem)
Advanced
Advanced Chipset
Configuration
Wake On Ring
Enabled
Use remote power on function
(from RTC alarm)
Advanced
Advanced Chipset
Configuration
Wake On RTC Alarm
Enabled
Boot
Control from HW console
terminal
Advanced
Serial Port Configuration
Change respective setting.
Security
Set a password
Security
Administrator Password
Enter a password
(Set a password for Administrator first
and then User)
There are two types of
password; Administrator and
User.
Settings for User password is
limited compared to for
Administrator.
When the server is supplied
with power from UPS, always
turn on the power.
Server
AC-LINK
Power On
If it is turned off by using
POWER switch, leave it OFF
even when UPS supplies
power.
Server
AC-LINK
Last State
UPS
Power link
Keep the power OFF even
when UPS supplies power.
Server
AC-LINK
Stay off
