1. Installing Internal Optional Devices
Express5800/GT110d User’s Guide
63
Chapter 2 Preparations
The depth of mountable boards is 175 mm for short sizes and 312 mm for long sizes.
For details of functions of each card, refer to the technical guide.
The card performance described in the parentheses after the Product name indicates the maximum
operation performance of the card.
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that
of the PCI slot.
(a) About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming with the standard network and the following
LAN cards:
N8104-134
1.10.3
Installation
Install a PCI card to connect to a PCI slot by using the following procedure. For details, refer to the
instruction manual supplied with your OS.
1.
Before installation, make sure the switch or jumper settings on the card are properly set according to
the instruction manual supplied with the card if necessary.
2. Refer
to
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
3.
Remove the side cover while referring to
Chapter 2 (1.4
Removing the Side Cover
)
.
4. Lift the tab of the PCI card retention spring to
unlock.
When it unlocks, you hear a clicking sound.
5. Rotate the PCI card retention spring toward the
connector of the server as far as it goes.
