3. EXPRESSSCOPE ENGINE 3
Express5800/GT110d User’s Guide
117
Chapter 3 Setup
4. When the Off-line TOOL MENU appears, select
BMC Configuration
,
BMC Configuration
,
Network
,
and then
Property
.
5. If
Property
is selected, the following screen is displayed. On this screen, specify whether to use DHCP
and if DHCP is not used, configure IP Address/Subnet Mask.
6. Connect the LAN cable to the management LAN connector in order to connect to the network. It will be
available for use if you access EXPRESSSCOPE Engine 3 via Web browser from PC for management
according to the setting.