Monitoring the ft Server 4-3
Express5800/ft Maintenance
Express5800/ft series maintenance can be performed in two ways; one is to use
ESMPRO Manager for remote maintenance and the other is to use the
ft Server Utility located on the managed Express5800/ft server.
Note:
To start the NEC ESMPRO Agent ft server utility installed in the
NEC Express5800/ft, type:
/opt/nec/esmpro_sa/ESMftcutil
The maintenance functions that can be executed from ESMPRO include three
types, those common to all components, those specific to particular components,
and general system settings.
The table below lists the maintenance functions for specific components in your
server and indicates how the functions of these components may be executed.
Control
Component
Function
Locally
ft Server Utility
Remotely
ESMPRO
Manager
module Start/Stop
yes
yes
MTBF Log Clear
yes
yes
module Diagnostics
no
no
Firmware Update
yes
no
Dump Acquisition (during operation)
yes
yes
Dump Acquisition (stopped module)
yes
no
CPU module
Board Switch
no
no
module Start/Stop
yes
yes
MTBF Log Clear
yes
yes
PCI module
module Diagnostics
no
no
Ethernet Adapter
MTBF Log Clear
yes
yes
SCSI Bus
Bus Reset
no
yes
SCSI Enclosure
SCSI Electronics
SCSI Slot
MTBF Log Clear
no
no
BMC
Firmware Update
yes
no
System
Quick Dump, Auto-firmware Update, Auto-
module Start
no
no
SCSI Disk
Preventive Disk Maintenance Setup
yes
no
SCSI Adapter
MTBF Log Clear
yes
yes
