![background image](http://html.mh-extra.com/html/nec/express5800-140hf/express5800-140hf_user-manual_251226395.webp)
Upgrading Your Server 9-33
Hot-plug PCI Board
On the PCI board slots #6 through #9, you can replace or add a hot-plug PCI board while the server
is operating.
Only N8104-86 100BASE-TX Adapter and N8104-111 100BASE-TX Adapter support the Hot-plug
PCI function.
The PCI hot-plug function includes the following functions:
Hot Add
Use Hot Add to install a Hot Plug PCI board while the server is operating.
Hot Remove
Use Hot Remove to remove a Hot Plug PCI board while the server is operating.
Hot Replace
Use Hot Replace to replace a Hot Plug PCI board while the server is operating.
IMPORTANT:
Before removing a PCI board, be sure to stop the driver of the slot
(containing the PCI board) from the operating system (Windows Server
2003). Failure to do so may cause the system to fail.
For Windows Server 2003 server, do not use a function in inactive state
after executing the PCI Hot-plug function. The system fails to return to the
original state when a function in inactive state is restarted.
Use the BIOS Setup utility to set the following before executing the PCI
Hot Plug function:
Select [Advanced]
→
[PCI Configuration]
→
[Hot-plug PCI Control]
→
[Reserving memory space for PHP]
→
Select memory space for installed
board*
1
.
*1 The memory capacity appears to be less than the actually installed memory
capacity.
To execute the PCI Hot-plug function, be sure to login the system as
Administrator.
The board available for the hot add varies depending on the clock rate
previously set by PCI slots #6 and #7 or #8 and #9. If a PCI board
operating at a different clock rate is subject to the hot addition, the PCI slot
fault lamp goes on and the hot plug cannot be performed correctly.
However, restarting the system allows BIOS to ignore the setting value and
automatically operate the system with the optimum setting.
Requirements for Hot Add
No boards installed in the same bus
Verify the available slot according to "List of Optional Devices and their Available Slots",
and then hot-add the PCI card.
PCI boards installed on the same bus
Provide Hot Add for PCI boards operating at the same clock.
Содержание Express5800/140Hf
