NEC Express5800 120Li, Руководство пользователя

Страница: 52 / 344

2-24 General Description
IMPORTANT:
If the DVD-ROM drive produces large noise after the
setting of a disc, set the disc again.
To remove a disc, press the Open/Close button to eject the tray, as described for inserting it, and
then take the disc out of the tray. (The orange-lit access lamp indicates ongoing disk access. The
Open/Close button does not work while the lamp is lit.)
Your OS may have a command to eject the tray.
When you have taken out the disc, retract the tray back in place.
When you fail to eject:
When you fail to eject the DVD-ROM tray with the Open/Close button and take out the disc from
the server, follow the procedure below.
1.
Press the POWER switch to power off the server. (The POWER/SLEEP lamp goes off.)
2.
Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a
straightened large paper clip will make a substitute) into the emergency hole on the right
front of the DVD-ROM drive and gently push it in until the tray is ejected.
IMPORTANT:
„
Do not use a toothpick or plastic stick that is easy to break.
„
If the above procedure does not let you take out the disc, contact
your sales agent.
3.
Hold the tray and pull it out.
4.
Take out the disc.
5.
Push the tray back into position.