NEC Express5800/110Ge Скачать руководство пользователя страница 190 | Manualshive

Страница: 190 / 332

NEC Express5800/110Ge Скачать руководство пользователя страница 190

8-12 Troubleshooting

The POWER/SLEEP lamp goes on when the power cord is connected:

→

When the server receives an AC power after the power cord is connected, the
POWER/SLEEP lamp goes on. This is a normal operation of the server, not a fault.
The lamp will go off when DC power is turned on, and then off.

Inserted the correct DVD/CD-ROM but the message like the following is displayed:

The DVD/CD-ROM is not inserted or the wrong DVD/CD-ROM is inserted.
Please insert the correct DVD/CD-ROM.
OK

T

Is the data side of the DVD/CD-ROM dirty or injured?

→

Take the DVD/CD-ROM out of the optical disk drive, confirm that it is not dirty
or injured, reset and click [OK].

Fail to access the hard disk drive:

(Refer to the documentation supplied with the RAID Controller.)

T

Is the hard disk drive applicable to the server?

→

Operation of any device that is not authorized by NEC is not guaranteed.

T

Is the hard disk drive properly installed?

→

See Chapter 9.

Fail to access the (internal or external) SCSI devices:

T

Is the SCSI device applicable to the server?

→

Operation of any SCSI device that is not authorized by NEC is not guaranteed.

T

Is the cable connection changed?

→

See Chapter 10 for cable connection.

T

Are SCSI devices properly configured?

→

When the server has external SCSI devices connected, hard disk drive settings,
including SCSI ID and terminator, are required. Refer to the manual that comes
with the SCSI device for details.

T

Is cable length exceeded?

→

Refer to the manual that comes with the SCSI device for details.

T

Are the optional SCSI controllers properly configured?

→

Use the BIOS Setup utility for proper configuration of SCSI devices connected to
the SCSI connector on the mother board. When the server has an optional SCSI
controller installed and SCSI devices connected to it, use the BIOS Setup utility
that comes with the optional SCSI controller for proper configuration. See the
manual that comes with the optional SCSI controller for details.

«
...
188
189
190
191
192
...
»

Содержание Express5800/110Ge













































































































































































































































































































































Отзывы:

Нет отзывов