manualshive.com logo in svg

NEC Express5800/110Ge, Руководство пользователя, Страница: 170 / 332

Поделиться
Скачать
NEC Express5800/110Ge Скачать руководство пользователя страница 170

7-2  Maintenance

CLEANING

Clean the server on a regular basis to keep the server in a good shape.

WARNING

Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages
1-3 to 1-8 for details.

■

 

Do not disassemble, repair, or alter the server.

■

 

Do not remove the lithium battery.

■

 

Disconnect the power plug before working with the server.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.

■

 

Avoid installation in extreme temperature conditions.

■

 

Make sure to complete board installation.

■

 

Protect the unused connectors with the protective cap.

Содержание Express5800/110Ge













































































































































































































































































































































Отзывы:

Нет отзывов