1. Setup Procedure
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
56
Chapter 1 Installing OS
Input the set values of the ft management appliance, and input “Y”.
9.
Important
The ESXi host and ftSys Management Appliance must exist on the same
network.
Specify the DNS server from which you can obtain a correct hostname and IP
address. If an inappropriate DNS server is specified, installation may fail.
Tips
Specify 24 for the prefix value to be input for IP Address/prefix if the Netmask value is
255.255.255.0. (Example of input) 192.168.1.1/24
Tips
You can configure the DNS server after completion of installation.
Input the host name or IP address of the ESXi host, and press the <Enter> key. Input the root
10.
password of the ESXi host, and press the <Enter> key.
Name or IP address of the host machine[]:
Administrative password for xxx.xxx.xxx.xxx:
The confirmation message appears. Input “Y”.
11.
Please refer to your system documentation before proceeding.
Do you want to continue [Y/n]: _
The confirmation message appears again. Input “Y”.
12.
Do you want to continue? [Y/n]: _
The following message appears, and the installation starts.
13.
Installing to host xxx.xxx.xxx.xxx. Please wait...
Setting claimrule 119 for driver ftSys_msgpt3 to use NMP
Updating the host's system software...
Deactivating port 80 for host upgrades
As the installation is finishing, the confirmation message for restarting appears. Input “Y”. Check that
14.
the ESXi host has shut down, and remove the ft control software installation DVD.
A host reboot is required to place these updates into service.
Do you want to reboot now [Y/n]: _
The system reboots, and the module registration for ft server and disk duplication are performed.
15.
These processes take several tens of minutes.
Содержание EXP320R
Страница 87: ... MEMO ...