![background image](http://html.mh-extra.com/html/nec/exp200/exp200_user-manual_251123293.webp)
Internal Cabling Diagrams 10-7
IMPORTANT:
Because data is read from or written to four hard disk drives
concurrently, the disk access performance is lower than that of the
configuration using only a single disk.
Because the parity data is saved, the logical capacity is a little lower
than the total capacity of the four hard disk drives.
To build a disk array, at least two hard disk drives are required. Use the SCSI cables sold separately
for the connection.
In the figure below, the number of connectors varies depending on the type of the SCSI cable.
5.25-inch device bay
3.5-inch device bay
Third hard disk drive
SCSI ID2
Second hard disk drive
SCSI ID1
First hard disk drive
SCSI ID0
CD-ROM drive
Floppy disk drive
Terminator
Power
supply
Mother board
Floppy disk
drive
IDE
IDE cable
FDD cable
SCSI cable
LED
connector
Disk array
controller
Содержание EXP200
