NEC DT530 Скачать руководство пользователя

Страница: 69 / 94

FEATURE OPERATION

TO ANSWER A MESSAGE

The Message reminder key must be programmed by the
Telephony Server administrator on the Programmable
feature key or soft key. For details, please contact the system
administrator.

To Display

The Message Reminder

key’s LED is lit. The

station is an idle state.

Press the Message Reminder

key.

Press the Message Reminder key again to display
additional messages in order received.

To Respond

While displaying the desired message, press the
Speaker key.

Press the Message Reminder key. The station
which left message is automatically redialed.

The message is erased.

To Erase

To erase a message without returning the call,
press the Message Reminder key to display the
desired message.

Dial # key while the message displays. The
message is erased.

■If the station that left message is busy, callback or the

Message Reminder

may be set. If the station that left

message does not answer, the

Message Reminder

may

be set, notifying originating party that a message return
was attempted.

■The key to redial (#,

＊

) can be changed by the system

setting. For details, contact the system administrator.

VOICE MAIL SYSTEM

The One-Touch Speed Calling key must be programmed by
the Telephony Server administrator on the Programmable
feature key or soft key.

To Set

Press the Feature key.

Press a One-Touch Speed Calling key.

Dial the desired “Voice Mail System” access code.

Press the Feature key again.

To Originate

Press the One-Touch Speed Calling key
registered “Voice Mail System” access code.

Hear a ringback tone.

To Set

Press the Feature key.

Press the Enter key.

Dial the desired “Voice Mail System” access code.

Press the Feature key again.

To Originate

Press the Enter key. The Shortcut menu screen is
displayed on the LCD.

Select

□

2 Voice Mail and then press the Enter

key, Right key or the OK soft key to access a
preset Voice Mail System.

Hear a ringback tone.

Содержание DT530































































































Результаты поиска

Содержание DT530

Отзывы:

Похожие инструкции для DT530

Бренды по названию

Популярные бренды

NEC DT530, Руководство пользователя

Результаты поиска

Содержание DT530

Отзывы:

Похожие инструкции для DT530

Бренды по названию

Популярные бренды