NEC DT530, Руководство пользователя

Страница: 67 / 94

FEATURE OPERATION
67
LOGGED OUT IP STATION
– CALL
DESTINATION
■The
Call Forwarding - Logout key must be programmed
by the Telephony Server administrator on the
Programmable feature key or soft key.
■“FDL” is displayed as the soft key of
Call Forwarding -
Logout feature.
To Set
1.
Lift the handset or press the Speaker key.
2.
Press the Call Forwarding-Logout key or dial
“Logged Out IP Station - Call Destination” access
code.
3.
Dial the destination station number; receive a
service set tone.
4.
Replace the handset or press the Speaker key.
Logged Out IP Station - Call Destination is set.
To Verify
1.
Press “Logged Out IP Station - Call Destination”
feature key lit red or press the FDL soft key.
2.
The display indicates the station number calls are
forwarded.
With soft key operation, the FDL soft key lights on the
display.
To Cancel
1.
Lift the handset or press the Speaker key; receive
a dial tone.
2.
Press the Call Forwarding-Logout key or dial
“Logged Out IP Station - Call Destination” cancel
code; receive service set tone.
3.
Replace the handset or press the Speaker key.
Logged Out IP Station - Call Destination is
canceled.
CALL BACK
If Called Station Is Busy
■The
Flash key must be programmed by the Telephony
Server administrator on a Programmable feature key.
■The
Call Back key must be programmed by the Telephony
Server administrator on the Programmable feature key or
soft key.
■“CB” is displayed as the soft key of
Call Back feature.
1.
Press the Call Back key. Receive a service set
tone.
- OR
–
1.
Press the Flash key and enter “Call Back” access
code.
2.
When the both parties become an idle state, the
calling party's phone rings. The calling party
would go off-hook and hear a ring back tone.
The called station would then be ringing.
3.
The connection is established when the called
party answers.
Call Back may be programmed by the Telephony Server
administrator on a Programmable feature key or by the user
on a
One-Touch Speed Calling key.