NEC Direction T-Series, Руководство пользователя

Страница: 77 / 124

Section 5
Disassembly and Reassembly
This section contains step-by-step disassembly procedures for the system unit. Reassembly
is the reverse of disassembly. The procedures are supported by simplified disassembly
illustrations to facilitate removal.
A Phillips-head screwdriver is the only required tool. For complete disassembly of the
system unit, follow the disassembly order listed in Table 5-1. To reassemble, follow the
table and procedures in reverse order.
Individual removal procedures do not require the total disassembly of the computer. Each
of the following subsections lists the parts that must be removed before beginning the
removal procedure.
Table 5-1 Disassembly Sequence
Sequence Part See Page
1 System access cover 5-2
2 Expansion board(s) 5-2
3 Front panel 5-3
4 Side panel 5-4
5 Device cage 5-4
6 Diskette drive 5-4
7 5 1/4-inch device 5-5
8 Standard 3 1/2-inch hard disk drive 5-6
9 Optional 3 1/2-inch hard disk drive 5-7
10 Fan assembly 5-8
11 DIMM module 5-9
12 Power supply 5-10
13 System board 5-11