Option Installation 3-11
DIMM Installation
Use the following procedure to install a DIMM.
1.
Remove the access cover.
2.
Locate the DIMM sockets.
3.
Remove any currently-installed DIMMs that are not needed. See “DIMM
Removal” in this chapter.
CAUTION:
Before installing a DIMM, reduce
static discharge by touching the system’s metal
chassis.
4.
To install a DIMM, align the module with an empty socket. Make sure that the
notches on the DIMM line up with the keys in the sockets.
5.
Insert the DIMM into the socket. Close the plastic clips at both ends of the
socket.
Figure 3-7 Installing a DIMM
6.
Replace any cables or boards that may have been removed.
7.
Replace the access cover.
Содержание Direction T-Series
Страница 8: ...Contents ix...
Страница 12: ...Abbreviations xiii VFC VESA compliant feature connector VGA Video Graphics Array VRAM video RAM W watt W write...
Страница 63: ...3 26 Option Installation 5 Turn on the printer and the computer Figure 3 20 Locating the Parallel Port...
Страница 101: ...B 2 Connector Pin Assignments Figure B 1 System Board Connectors and Slots Figure B 2 System Board External Connectors...