NEC Direction T-Series, Руководство пользователя

Страница: 31 / 124

Setup Utility 2-11
Peripheral Configuration Submenu
This submenu can be used to configure your system’s ports or peripheral devices. To enter
the submenu, highlight this field, then press the
Enter
key on your keyboard. The following
options appear:
„
Serial Port A/Serial Port B
These options let you configure your system’s Serial Port A or Serial Port B. You
can choose “Auto” (default), “Enabled” or “Disabled.” The “Auto” setting causes
the Setup program to assign the first free COM port (e.g., COM 1 3F8h, IRQ4 or
COM2, 2F8h, IRQ3). Note that if you set a specific serial port address, it does
not appear in the list of options for the other serial port.
NOTE:
If you select the Enabled option, you can
see additional options that allow you to specify
the Base I/O address and IRQs for the port you
are configuring.
„
Parallel Port
This option configures the system’s Parallel Port. Choose “Auto” (default),
“Enabled” or “Disabled.” The “Auto” setting causes the Setup program to assign
LPT 1, 378h, IRQ7.
NOTE:
If you select the Enabled option, you can
see additional options that allow you to specify
the Base I/O address and IRQs for the port you
are configuring.
„
Mode (Parallel Port)
This option sets the mode for the Parallel Port. The options include “Output
Only” (AT-compatible mode), “Bidirectional” (PS/2-compatible mode), “EPP”
(Extended Parallel Port – high speed bidirectional) and “ECP” (Enhanced
Capabilities Port – high speed bidirectional).
WARNING: An asterisk symbol appearing next
to an option indicates that the selected IRQ is set
to conflict with another device,
To return to the Resource Configuration submenu, press the Esc key on your
keyboard. Then press Esc a second time to return to the Advanced Menu.