NEC Direction T-Series, Руководство пользователя

Страница: 33 / 124

Setup Utility 2-13
Video Configuration Submenu
This submenu can be used to configure specific video features. To enter the submenu,
highlight the field, then press the
Enter
key on your keyboard. The following options
appear:
„
Palette Snooping
This option controls the ability of a primary PCI graphics controller to share a
common palette with an ISA add-in video board. Select “Enabled” or “Disabled”
(default).
„
Video Monitor Type
This option selects the type of VGA Monitor you are using. This setting should be
set to either “VGA” or “VGA and TV OUT,” depending on your system
configuration.
„
TV Out Signal Type
This setting selects the type of TV Out signal to be used and was configured
based on the region where you purchased your system. The options include:

NTSC (North America)

PAL (Europe)

PAL-M (South America).
To return to the Advanced Menu, press the
Esc
key
.
DMI Event Logging Submenu
This submenu can be used to view and modify DMI Event Logs. To enter the submenu,
highlight the DMI Event Logging field, then press the
Enter
key. The following options
appear:
„
Event Log Capacity/Event Log Validity
These fields indicate whether space is available in the Event Log, and whether the
contents of the log are valid.
„
View DMI Event Log
To view the DMI Event Log, highlight this option and press the
Enter
key. If
there are no event logs stored, the log displays No unread events.