©2018 NEC Display Solutions, Ltd.
Page
26
of
71
f.
Select
SERVICE MENU
.
g.
Select
SETTING LOCK
and then select
OFF
.
h.
Enter the passcode. The default is
0 0 0 0
.
i.
Select
USB BOOT MODE
and then select
ENABLE
.
j.
It is also recommended setting
SHUTDOWN SIGNAL
to
DISABLE
and
WDT
to
DISABLE
during programming.
k.
Exit two levels and navigate to the
POWER
item on the
COMPUTE MODULE
menu.
l.
Select
POWER SUPPLY
and then select
ON
.
Important
: If the display goes into standby mode or Compute Module is powered off and on,
it will automatically cancel USB BOOT MODE. Be sure to check that the boot mode is as
intended if the process needs to be restarted.
4.
Run the
Win32DiskImager
or
Etcher
tool and select the downloaded OS .img file.
If using Etcher:
a.
Launch the Etcher application.
b.
Select the downloaded OS .img file as the source image.
c.
The Compute Module should automatically appear as the destination drive.
f
g
h
i
j
k
l