©2018 NEC Display Solutions, Ltd.
Page
43
of
71
8 Related OSD Settings
8.1 Compute Module menu
Power
Power Supply
Available options: On / Off
Controls power to the Compute Module.
If the
Shutdown Signal
is Enabled, selecting
Off
will set the shutdown signal and the
Power Supply Off
Delay
timer will start. Power to the Compute Module will be turned off once the timer has finished.
8.2 Compute Module menu
Power
Auto Power On
Available options: Enable / Disable
When set to
Enable
, power to the Compute Module will be turned on automatically when the display
power is turned on. If set to
Disable
, power to the Compute Module is manually controlled via either the
POWER SUPPLY
setting on the
COMPUTE MODULE
OSD menu, or via the HTTP interface to the
display, or via a LAN command to the display (OpCode 117Ch).
Note that the Compute Module will remain on even when the display has been placed into Standby mode,
unless it is turned off via the
POWER SUPPLY
setting on the
COMPUTE MODULE
OSD menu, or via the
HTTP interface to the display, or via a LAN command to the display (OpCode 117Ch).
8.3 Compute Module menu
Service Menu
Setting Lock
Available options: On / Off
Access to other items on the
SERVICE MENU
is protected by a 4 digit password to prevent unauthorized
access. The password can be set on the Compute Module
CHANGE PASSWORD
OSD menu. The
default password is
0 0 0 0
.
The Setting Lock will default to
On
.
