English-19
English
Initial Setting
OSD Rotation
Select [Landscape] or [Portrait] as the orientation of the OSD.
Menu Language
Change the language used for OSD Menu.
Time Format
Select [12 Hour] or [24 Hour].
Clock
Set the time and date.
Remote Operation
Enable or disable Remote Operation.
Keypad Operation
Enable or disable Keypad Operation.
Anti-Image Retention
Select Anti-Image Retention, or set Anti-Image Retention to Off.
Multi Display
Monitor ID
Assign an ID number for control. The Monitor ID number can be selected from 1 - 8.
Power On Delay
Adjusts the delay time between being in "standby" mode and entering "power on" mode.
"Power On Delay" can be set between 0 and 30 seconds.
Power Lamp
If Off is selected, after turning on the power switch, you can turn off the light indicator (green).
System Information
Model Name
Displays the model name of the display.
SW Version
Displays the version of the current software of the display.
LAN Version
Displays the software version of the LAN currently used for the display.
IP Address
Displays the IP address currently set for the display.
NOTE: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a
residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not
permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving “Anti-Image
Retention” at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set “Anti-Image Retention”, “Clock” and “Scheduler” functions to further reduce the risk of Image persistence.
For long life use as Public Display
Image Sticking of LCD Panel
When an LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or
“ghost” image of previous image may be observed. (Image Persistence)
Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along the
displayed image, and may be permanent. (Image Sticking)
Recommendations
To prevent Image Sticking, and for longer life usage of LCD, the following are recommended.
1. Fixed image should not be displayed for long period. Change fixed images after short intervals.
2. When not in use, please turn off the monitor by remote control, or use Power Management or use Schedule Functions.
3. Lower environmental temperatures prolong the lifespan of the monitor.
When Protective surface (glass, acrylic) is installed over the LCD surface, the LCD surface is located in an enclosed space, the monitor are
stacked, utilize the temperature sensors inside monitor.
To reduce the environmental temperature, use the “Anti-Image Retention” and Low Brightness.
4. Please use “Anti-Image Retention Mode” of monitor.
