![background image](http://html.mh-extra.com/html/nec/bt421/bt421_user-manual_249512009.webp)
English-7
English
Orientation
• When using the monitor in the portrait position, it should
be rotated clockwise so that the right side is moved to
the top, left side is moved to the bottom. This will allow
for proper ventilation and will extend the lifetime of the
monitor. Improper ventilation may shorten the lifetime of
the monitor.
Remote control sensor and Power Indicator
Attaching Mounting Accessories
The monitor is designed for use with the VESA mounting
system.
1. Attach Mounting Accessories
Be careful to avoid tipping the monitor when attaching
accessories.
VESA Mounting Interface (M6)
400 mm
100 mm
Mounting accessories can be attached with the monitor in
the face down position. To avoid damaging the front face,
place the protective sheet on the table underneath the LCD
monitor. The protective sheet was wrapped around the LCD
monitor in the original packaging. Make sure there is nothing
on the table that can damage the monitor.
NOTE:
Prior to installation, be sure to place the monitor
on a flat area with adequate space.
NOTE:
You can use 200 mm/100 mm holes for mounting.
Mounting Interface (M6)
200 mm
100 mm
2. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the enclosure
to allow heat to disperse, as shown below.
30mm
Must be under 50 Degree Celsius.
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from the
unit and the mounting equipment; especially when you use
monitors in a multiple screen configuration.