NEC Aspila Topaz, Руководство по программированию

Страница: 386 / 390

378
Program 92: Copy Program
92-01: Copy Command
Programming Manual
IN
SA
SB
2. Trunk Group Base
Prog.No. Program Name Note
35-03 SMDR Port Assignment for Trunk Group
3. Extension Base
Prog.No. Program Name Note
15-01
Extension Basic Data Setup (include Virtual
Extension)
Copy all data except extension name(15-01-01)
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10
Incoming Virtual Extension Ring Tone Order
Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12
Conversation Recording Destination for
Extension
20-06
Class of Service for Extension
21-02 Trunk Group Routing for Extensions
21-04
Toll Restriction Class for Extensions
21-11 Hotline Assignment
23-03
Ringing Line Preference
23-04
Ringing Line Preference for Virtual
Extensions
24-03 Park Group Assignment
31-02 Internal Paging Group Assignment
4. Department Group Base
Prog.No. Program Name Note
16-01
Department (Extension) Group Basic Data
Setup Copy all data except Group Name (16-01-01).
35-04
SMDR Port Assignment for Department
Group
5. DSS Console Base
Prog.No. Program Name Note
30-03 DSS Key Assignment
Conditions
Using this program to copy a keyset’s Programmable Function Keys will copy all the keys whether they exist on the
phone to which the programming is being copied. This may cause confusion when trying to define a key which is
already defined but which doesn’t exist on the phone (will display as “DUPLICATE DATA”). It is recommend to
either clear these non-existent keys or to only copy from an extension which has the same or fewer number of keys
than the extension to which the programming is being copied.