NEC Aspila Topaz, Руководство по программированию

Страница: 60 / 390

52
Programming Manual
Program 11: System Numbering
11-09: Trunk Access Code
IN
SA
SB
Description
Use Program 11-09 : Trunk Access Code to assign the trunk access code (normally 9). The trunk access code can
be set from 1 to 4 digits which is defined to type 3 and 4 in Program 11-01. This is the code extension users dial to
access Automatic Route Selection. The Individual Trunk Access Code is used when Trunk Group Routing is desired
for an outgoing line.
Caution
The digit 9 is defined in Program 11-01 as Dial Type 3 with the Number of Digits Required set to 1. If you change
the trunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.
Input Data
Prog. No. Item Input data Default Description Related Program
11-09-01
Trunk
Access
Code
(for
Type3)
Dial
(Up to 4
digits)
9
Use this program to assign the
trunk access code (normally
9). This is the code extension
Users dial to access
Automatic
Route Selection. • 11-01 : System
Numbering
• 14-01-07 : Trunk Basic
Data Setup
• 14-05 : Trunk Group
• 14-06 : Trunk Group
Routing
11-09-02
Alternate
Trunk
Route
Access
Code
(for
Type4)
Dial (Up
to 4 digits)
No
Setting
Use this program to define
additional trunk access codes.
When a user dials the
Alternate Trunk Route
Access Code, the system
routes their call to the
Alternate Trunk Route. • 11-01 : System
Numbering
• 14-01-07 : Trunk Basic
Data Setup
• 14-05 : Trunk Group
• 14-06 : Trunk Group
Routing
• 21-02 : Trunk Group
Routing for
Extensions
• 21-15: Alternate Trunk
Group Routing
for Extensions
Conditions
None
Feature Cross Reference
‹ Automatic Route Selection
‹ Central Office Calls, Placing
‹ Trunk Group Routing