NEC Aspila Topaz, Руководство по программированию

Страница: 133 / 390

125
Program 20: System Option Setup
20-01: System Options
Programming Manual
IN
SA
SB
Description
Use Program 20-01 : System Options to set various system options.
Input Data
Prog. No. Item Input data Default Description
Related
Program
20-01-01
Operator Access
Mode 0 : Step
1 : Circular 0 Use this program to set up priority
of a call when calling an operator
telephone. 20-17
20-01-02
Test Message Mode 0 : Call mode
1 : Absent mode
(Busy Tone)
0 Use this program to select the
mode when calling the telephone
which set up the text message. 11-11-14
15-07-08
20-01-03 DSP Sender
Resource Selection 0 : Conference
1 : Caller-ID
2 : MFC 0
20-01-04 -Not Used- - -
20-01-05
DTMF Receive
Active Timer 0-64800(sec.) 10 For OPXs, analogue telephones
and certain analogue trunks (like
DISA), the system attaches a
DTMF receiver to the port for this
interval. The system releases the
receiver after the interval expires. 25-07-01
20-01-06
Alarm Clock
Duration 0-64800(sec.) 30 This interval sets the duration of
the alarm signal. 11-11-12
20-01-07 Callback Ring
Duration 0-64800(sec.) 15 Callback rings an extension for
this interval. 11-12-05
15-07-35
20-01-08 Trunk Queuing
Callback Time 0-64800(sec.) 15 Trunk Queuing callback rings an
extension for this interval. 11-12-05
15-07-35
20-01-09
Callback/ Trunk
queuing Cancel
Time 0-64800(sec.) 64800 The system cancels an extension’s
Callback or Trunk Queuing
request after this interval. 11-12-05
15-07-35
20-01-10
Trunk Guard Timer 0-64800(sec.) 1
Conditions
None
Feature Cross Reference
‹ Refer to above chart