Neatech EVO3 Скачать руководство пользователя страница 60

Страница: 60 / 136

www.neatech.it

49/122

WARNING

The wheelchair complies with the requirements of ISO 7176-19:2008 and

has been designed and tested for use only as a forward-facing seat in a

motor vehicle.

Compliance with this standard does not preclude using the wheelchair

facing rearward in large accessible vehicles such as autobus.

WARNING

The wheelchair has been dynamically tested in a forward facing orientation

with the ATD restrained by both pelvic and shoulder belts.

WARNING

Both pelvic and shoulder belt should be used to reduce the possibility of

head and chest impacts with vehicle components.

WARNING

In order to reduce the potential of injury to vehicle occupants wheelchair

tray should be removed and secured separately in the vehicle.

WARNING

When possible other auxiliary wheelchair equipment should be either

secured to the wheelchair or removed from the wheelchair and secured in

the vehicle during travel, so that it does not break and cause injury to vehicle

occupants in the event of a collision.

Содержание EVO3









































































































































Результаты поиска

Содержание EVO3

Отзывы:

Похожие инструкции для EVO3

Бренды по названию

Популярные бренды

Neatech EVO3, Руководство пользователя

Результаты поиска

Содержание EVO3

Отзывы:

Похожие инструкции для EVO3

Бренды по названию

Популярные бренды