Neatech EVO3, Руководство пользователя

Страница: 69 / 136

www.neatech.it
58/122
AXIS 3 TILT
Figure 49
MOVE UP
It is possible to incline forward the seat. The movement
stops when seat angle is 0°. When the movement stops
you will hear a sound.
MOVE DOWN
You can recline rearward the seat. During the
movement, in order to avoid unconfortable position for
the user backrest or legrest could start to move
automatically. An authorized service center is able to
choose the way of compensation for backrest and
legrest. The movement stops when seat angle is 45°
AXIS 4 LIFT
Figure 50
The seat is lifted with an innovative system that allows
to better manage the center of gravity of the system
wheuser. They are used two different actuators
at the same time.
it is needed a sophisticated software to adjust the speed
of these two actuators.
This software can be fine-tuned by an authorized service
center during the set-up of the wheelchair.
MOVE UP
It is possible to rise up the seat. Previously start to lift
the seat, if this is forward tilted, it is firstly straightened.
When seat height is 30 cm, if seat angle is 0° the
movement stops, otherwise the seat will be
straightened till seat angle is 0°. When the movement
stops, you will hear a sound.
. When the movement stops, you will hear a sound.
MOVE DOWN
It is possible to lower the seat. During the movement it
is possible that legrest or seat move automatically if
there is any danger for the legrest to crash into the
chassis or the floor. The movement stops when seat
height is 0 cm. When the movement stops you will hear
a sound.