NCR Self Serv 60, Руководство пользователя

Страница: 58 / 108

Chapter 2: Hardware Installation 2-15
3. Align the DIMM in the socket and push it into the socket (the SODIMM socket is keyed).
Note: If only one memory module is being used insert it in the bottom socket.
The Intel ME/AMT features will not function unless the bottom slot is populated.
26702
Memory Module Sockets
4. Press the module down until it latches in position. Ensure that the edges of the
SODIMM engage the latches and that the latches are completely closed.
Note: After powering up the terminal, re
‐
flash the SPI/BIOS to ensure the latest
version is installed and verify that the terminal is fully functional (see the BIOS
Updating Procedures chapter in the NCR RealPOS 70
XRT
User Guide
(B005
‐
0000
‐
1872). During this operation you will see a prompt for terminal model
and serial number information.
Important: Model/Serial Number is mandatory.