5-6
Chapter 5: BIOS Updating Procedures
Option 4 – Update of SPI and BIOS – Always prompts for Serial/Model/Class
This option is similar to Option 1 above except you are prompted for
Class/Model/Serial
information at the beginning of the program. You also have to select which type of update
to run, BIOS or SPI.
1. Highlight Option 4 and press
[ENTER]
.
2. At the prompt press
[ENTER]
to enter the Class/Model/Serial Number
information (DMI). Follow the onscreen format instructions.
Example:
7409- 1500- 8801
[ENTER]
54- 19378230
[ENTER]
3. Press
1
to confirm the data and to continue.
4. The Flash Program updates the SPI/BIOS, automatically powers down, and then
reboots the terminal.
5. After a few seconds the terminal reboots again.
6. As the terminal reboots select the boot media again
[F8]
(if necessary) to have the
terminal boot from the SPI/BIOS media.
7. Let the terminal boot from Option #1 (default). The Manageability Engine (ME) is
programmed at this time.
8. At the prompt:
( Pr ess <0> f or command pr ompt , or <3> t o r eboot ( aut omat i c i n 10 seconds)
press
[3]
to reboot.
9. A message is displayed indicating power must be removed before continuing.
Press
[3]
to perform a 20 second AC power removal (automatically executes in 2
minutes if no keys are pressed).
10. Remove the BIOS/SPI Update media before the system boots.
Содержание Self Serv 60
Страница 43: ...1 34 Chapter 1 Product Overview...
Страница 69: ...3 10 Chapter 3 BIOS Settings...
