NCR Self Serv 60, Руководство пользователя

Страница: 78 / 108

Chapter 5: BIOS Updating Procedures 5-7
Option 5 – Update of BIOS only – Always prompts for Serial/Model/Class
This option prompts for Class/Model/Serial information at the beginning of the
program and then updates the BIOS only.
1. Highlight Option 5 and press
[ENTER]
.
2. At the prompt press [ENTER] to enter the Class/Model/Serial Number
information (DMI). Follow the onscreen format instructions.
Example:
7409- 1500- 8801
[ENTER]
54- 19378230
[ENTER]
3. Press 1 to confirm the data and to continue.
4. The Flash Program updates the SPI/BIOS and automatically reboots the terminal.
Option 6 – Update SPI and BIOS – Default Serial/Model/Class information
This option is for Service Personnel only. It updates the SPI and BIOS but leaves the
Class/Model/Serial fields empty (erased). The DMI information is then entered when
the board is installed in a terminal.
1. Highlight Option 6 and press [ENTER] .
2. The SPI and BIOS are updated and the system reboots (2 times).
3. Remove the SPI/BIOS Update media before the system boots.
4. System is ready for operation.