NCR EasyPoint 7401, Руководство по подготовке площадки

Страница: 6 / 90

iv Site Preparation
In addition to the need to comply with the requirements specified,
electrical wiring and mechanical systems must also comply with all
relevant codes, laws, and regulations.
It is important that a customer or his agent who is fully conversant
with the special requirements of electronic equipment prepare the site.
The responsibility of ensuring that the site is prepared in compliance
with this document remains with the customer.
For information and guidance purposes only, a list is provided, in
general terms, of those matters for which the customer is responsible.
This list is not intended to be comprehensive, and in no way modifies,
alters, or limits the responsibility of the customer for all aspects of
adequate site preparation.
NCR staff will be available to answer questions relating to the contents
of this document except where:
•
A customer has been notified that a full or partial consultant service
is available and/or that NCR will be willing to undertake a
preliminary or final site survey and
•
The customer shall have entered into a formal contract with NCR
for provision of the same.
No comment, suggestion, or advice offered or not offered about
preparation of the site, nor any inspection of the site, whether before of
after preparation, is to be taken as approval of the location of the site
and equipment or its preparation. NCR will not be liable in respect to
any comment, suggestion, or advice given by its staff or in respect to
any failure to give advice.
Finally, only the customer can know the full extent of damage that may
be caused to his business by reason of failure of the equipment which is
to be installed. For this reason, it is the customer’s responsibility to
ascertain the extent of any possible damage to his existing or planned
business, and to effect full insurance for all eventualities.