NCR 7707-K261, Инструкции к набору

Страница: 6 / 24

2 Handheld Scanner Holster
Installation Procedures
To install the Handheld Scanner Bracket, follow these steps:
1. Remove the Terminal Display. For more information, refer to Removing the Terminal
Display on page 5.
2. Remove the Terminal Display Rear Cover. For more information, refer to Removing
the Terminal Display Rear Cover on page 7.
3. Do any of the following, if necessary:
• Remove the Wireless Antenna Module. For more information, refer to Removing
the Wireless Antenna Module on page 8.
Note: Both Semi-Self and Self-Checkout configurations of NCR SelfServ™
Checkout (7707) allows the 7702 Terminal Display to hold both the Wireless Card
Antenna and the Handheld Scanner Bracket. Depending on the orientation of the
unit, the two devices can be interchanged.
• Remove the existing scanner bracket assembly by removing the two (2) screws
securing the scanner bracket to the Display Collar, as shown in the image below.