NCR 7707-K261, Инструкции к набору

Страница: 12 / 24

8 Handheld Scanner Holster
Removing the Wireless Antenna Module
To remove the Wireless Antenna Module, follow these steps:
Note: For more information about the wireless card and antenna, refer to the RealPOS
XR7 (7702) POS User Documentation .
1. Remove the Terminal Display Rear Cover, if necessary. For more information, refer
to Removing the Terminal Display Rear Cover on the previous page.
2. Disconnect the Ground and Wireless Antenna cables from the board, as shown in the
image below.
3. Remove nine (9) screws to detach the Display Collar from Terminal Display, as
shown in the image below.