NCR 7707-K261, Инструкции к набору

Страница: 8 / 24

4 Handheld Scanner Holster
b. Attach the scanner bracket assembly to the Display Collar using two (2) screws,
as shown in the image below.
Note: The scanner bracket assembly can be installed on either side of the
Terminal Display. For the purpose of illustration only, the image below shows a
Right-hand (RH) orientation.
5. Install the Wireless Antenna Module on the other side of the Terminal Display, if
necessary. For more information, refer to Installing the Wireless Antenna Module on
page 12.
6. Install the Terminal Display Rear Cover. For more information, refer to Installing the
Terminal Display Rear Cover on page 15.
7. Install the Terminal Display. For more information, refer to Installing the NCR
Terminal Display on page 16.