7360-K401 PIN Pad Arm
3
Installation Procedures
To install the PIN Pad Arm, follow these steps:
1. Do any of the following, if necessary:
•
Remove the No PIN Pad Blanking Plate, if the unit was not configured with a
PIN Pad Arm. For more information, refer to
Removing No PIN pad Blanking Plate
•
Remove the existing PIN Pad Mount. For more information, refer to
•
Remove the existing PIN Pad Arm. For more information, refer to
2. Secure the PIN pad Arm to the Tower Frame using three screws, as shown in the
image below.
DRAFT