63
BROWSE CONSISTS
(Shortcut = PROG 9)
This option lets you see what advanced consists are currently in the memory of the
system.
Press ENTER at the “BROWSE CONSISTS” prompt. The LCD will display the
highest numbered consist in the system memory. It will look something like:
CON: 127 10:42AM
CON: 127 10:42AM
CON: 127 10:42AM
CON: 127 10:42AM
CON: 127 10:42AM
LEAD:2190 R:4484
LEAD:2190 R:4484
LEAD:2190 R:4484
LEAD:2190 R:4484
LEAD:2190 R:4484
Use the speed buttons or thumbwheel to scroll the next higher or lower consist in the
list. When you get to the end of the list it will roll over to the ‘other’ end. Pressing
ENTER will show any mid consist locomotives of the displayed consist.
Pressing ENTER while the Lead/Rear locomotives are displayed will show any mid-
consist locomotives. (The system will remember up to 2 mid-consist locos per
advanced consist). Press ENTER again to view the next consist.
Pressing SEL LOCO will exit browsing and select the displayed consist for running.
Pressing CLEAR then pressing 1 at the “KILL CON?” prompt will kill the displayed
consist.
Press PROG/ESC at any time to exit browsing.
PROGRAM SIGNAL DECODERS
(Shortcut = PROG 0)
This allows the operator to setup Signal Decoders while they are connected to the
Track (Signal Programming on the Main).
ENTER THE SIGNAL ADDRESS
Enter the Decoder address and press ENTER.
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
SIGNAL NUM: _
SIGNAL NUM: _
SIGNAL NUM: _
SIGNAL NUM: _
SIGNAL NUM: _
ENTER THE CV NUMBER
Enter the CV number that you want to program and press ENTER.
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
ENTER CV NUM: _
ENTER CV NUM: _
ENTER CV NUM: _
ENTER CV NUM: _
ENTER CV NUM: _
ENTER THE CV VALUE
Enter the value you want in the CV and press ENTER.
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
PROG ACC 02:00PM
ENTER VALUE: _
ENTER VALUE: _
ENTER VALUE: _
ENTER VALUE: _
ENTER VALUE: _