NCE Power Cab, Руководство владельца, Страница: 45 / 71

45
REGULAR BULB OR REGULAR BULB OR
REGULAR BULB OR REGULAR BULB OR
REGULAR BULB OR
LED 1=BULB 2=LED LED 1=BULB 2=LED
LED 1=BULB 2=LED LED 1=BULB 2=LED
LED 1=BULB 2=LED
Last, press 1 if the output has a regular incandescent bulb attached. Press 2 if the output
has an LED connected. LEDs behave differently when dimmed than incandescent bulbs.
Pressing 1 or 2 informs the decoder which set of lighting characteristics to use for this
output.
QSI PROGRAMMING (Option 8)
QSI sound decoders use indexed programming of CV51,CV52,and CV56. You are
asked for an index number before you are asked for the CV value. CV49 is then
automatically set with the index value before the original CV is set with the desired
data.
When programming CV56 you are asked for primary and secondary index numbers
before you are asked for the CV value. CV49 and CV50 are then automatically set
with the index numbers before CV53 is set with the desired data.
All other CV’s are programmed in the normal manner.
BINARY CV PROGRAMMING (Option 9)
Use this option if you need to build up the value for a CV bit-by-bit. Enter the CV
number you wish to program.
BIN PROG 02:10AM BIN PROG 02:10AM
BIN PROG 02:10AM BIN PROG 02:10AM
BIN PROG 02:10AM
ENTER CV NUM: _ ENTER CV NUM: _
ENTER CV NUM: _ ENTER CV NUM: _
ENTER CV NUM: _
Then press bit number (top line of LCD has bit numbers) to toggle the corresponding
individual bits on the lower line of the LCD that make up a binary byte. In the example
below the 1, 3 and 7 keys have been pressed to set the corresponding bits in the
byte. To set the value of a bit back to 0 press the bit number again.
CV: 060 76543210 CV: 060 76543210 CV: 060 76543210 CV: 060 76543210 CV: 060 76543210
BITS: 10001010 BITS: 10001010 BITS: 10001010 BITS: 10001010 BITS: 10001010
When you get the value built up to the number you desire, press ENTER to program
the CV.