60
NUMBER OF RECALLS
This adjusts the number of recall “slots” that are cycled through when the RECALL
key is pressed. Enter a number of Recalls from 1 - 6 and press ENTER. This can be
set differently for each Cab. (factory default is 2) Press ENTER to skip setting this
parameter.
NUMBER 02:00PM
NUMBER 02:00PM
NUMBER 02:00PM
NUMBER 02:00PM
NUMBER 02:00PM
OF RECALLS: 02
OF RECALLS: 02
OF RECALLS: 02
OF RECALLS: 02
OF RECALLS: 02
ANALOG HORN CHANNEL (default is 0)
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
HORN CHANNEL _
HORN CHANNEL _
HORN CHANNEL _
HORN CHANNEL _
HORN CHANNEL _
If you have a decoder that supports a “playable” whistle such as a SoundTraxx
Tsunami, enter the analog “channel number” that the decoder uses for whistle. You
can play the whistle by holding the HORN/WHISTLE button while moving the
thunbwheel. If the channel is set to 0 no analog commands will be sent.
ANALOG AUX CHANNEL (default is 0)
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
AUX CHANNEL: _
AUX CHANNEL: _
AUX CHANNEL: _
AUX CHANNEL: _
AUX CHANNEL: _
ANALOG BIAS (default is 0)
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
ANALOG 02:00PM
BIAS (0-15)
BIAS (0-15)
BIAS (0-15)
BIAS (0-15)
BIAS (0-15) _
_
_
_
_
This is the starting point or “level” (0-15) at which analog commands will start.
ASSIGNING THE BELL FUNCTION (default is 1)
Enter the function number that should be activated when the Bell key is pressed. We
recommend using 1, however any function number may be used. Soundtraxx Diesel
decoders use Function #1 for control of the Bell.
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
ASSIGN 02:00PM
BELL TO FUNC: 1
BELL TO FUNC: 1
BELL TO FUNC: 1
BELL TO FUNC: 1
BELL TO FUNC: 1
Older Soundtraxx Steam decoders use Function #3 for the Bell. The steam
decoders can have the bell “re-mapped” to Function #1 (Diesel decoders can not re-
map the bell to Function #3). Press ENTER to skip setting this parameter.