NCast Presentation Recorder Reference Manual
1.6. P
RESENTATION
R
ECORDERS
– C
ONNECTOR
O
PTIONS
The following diagram describes the back-panel connectors available:
Backpanel for PR-HD-Basic-M, PR-HD-Basic-P
•
Serial Control
– Wired control from a touch panel, such as Crestron or AMX
•
Ethernet
– Connection to the Internet
•
XLR Audio
– Balanced XLR input connector and additionally a balanced 0.25” connector
•
VGA
– Input from the presenter's PC
•
VGA Loopback
– VGA output, usually to the room projector
•
VGA/Component Out
– RGBHV or Y-Pb-Pr output to the local display
•
USB
– For specifying a static IP connection with a USB drive or saving an archive file
•
Line-In, Line-Out, Mic-In
- Unbalanced 3.5 mm. audio connections. Stereo for Line-In, Line-Out
•
HDMI
– Video input from cameras or computers, audio not supported
•
DVI-D
– Digital input
•
DVI-A –
Analog RGBHV input or Y-Pb-Pr component from a camera source
•
Displayport
– Input from the Displayport output of a computer
•
SDI
– 3G-SDI Serial Digital Input
•
Composite
– NTSC or PAL input
Note: Conversion of HDMI or DVI signals to Displayport requires an active (not passive) adapter.
NCast Corporation
Revision 2.2
Page 8
