NCast Presentation Recorder Reference Manual
The local meters are useful to check for proper connectivity and activity of the sound system connected to
the Presentation Recorder. The levels should be checked for proper range, and gains should be changed if
the audio is too hot or soft.
7.5.6. OSD Position
The OSD positioning controls (Top-left, Top-right, Bottom-left, Bottom-right) allow the meter display to be set
in an area of the screen that does not obscure other important windows (like the PIP window, for example).
7.5.7. Configure OSD
The contents of the OSD can be tailored to contain only those elements required to be shown on the screen:
7.6. T
ELNET
S
ETTINGS
The Telnet tab is used to enable the Telnet Serial Interface to the unit, an interface, which may be used to
send and receive command and control, strings over IP-based networks. See the
Serial Interface
Specification Manual
for complete information on the serial command interfaces.
NCast Corporation
Revision 2.2
Page 66
