AUX IN 2 OPERATION (Good)
OPTICAL-IN OPERATION (Best)
You can connect an external Audio/Video player (such as a TV,
DVD player, VCR, etc.) to the unit and project audio through the
speakers.
1. Plug one end of the red and white RCA cable into the LINE-IN
jacks on the rear of the unit. Plug the other end of the red and
white RCA cable into into audio-out jacks on your external A/V
device, such as a TV.
NOTE: Be sure to connect properly, as shown below, to
establish a proper connection.
2. Plug one end of the adapter into the DC-IN jack of the speaker.
Plug the adapter into the wall outlet. Press and hold the STAND-
BY/MODE button to power on the unit. Wait until “WIFI” appears
on the display.
3. Press the MODE button repeatedly until “AUX 2” flashes on the
display.
Audio-out jacks
5
2. Plug one end of the adapter into the DC-IN jack of the speaker.
Plug the adapter into the wall outlet. Press and hold the STAND-
BY/MODE button to power on the unit. Wait until “WIFI” appears
on the display.
3. Press the MODE button repeatedly until “OPT” flashes on the
display.
4. Power on the connected external player and start playback.
Go to your digital audio output settings and set it to PCM (Plus
Code Modulation), as shown in the figure below:
NOTE: The optical connection cable necessary for this mode
is not supplied with the device. Also, please note that
Amazon Alexa functionality is not available in this mode.
4. Play music on your external device.
NOTE: Amazon Alexa functionality is not available in this
mode.
1. Connect the Optical-out jack from the external audio player (TV,
DVD player, BD player, or other external device with optical connection
capabilities) to the Optical-IN jack on the top of the unit with an optical
connection cable (not supplied), as shown in the figure below: (For
PCM format only)
