REMOTE CONTROL
11
BATTERY INSTALLATION FOR REMOTE
Remove and discard the insulation film, as shown in
the Figure to the right.
Replacing the remote control’s batteries:
1. Push and slide out the battery holder, as shown in
Figure 1 below.
2. Replace the battery with a new CR2025 button cell as,
facing the polarity markings towards the rear of the remote.
3. Close the battery holder.
WIFI SETUP
2
HOME SCREEN INTERFACE
Tap “NAXA” to enter the home screen. Navigate as shown below
and follow the on-screen instructions. Some platforms may
require registration for use.
COMMUNICATION INDICATOR STATUS
SPEAKER STATUS
LED STATUS
Idle
White LED ON
Listening
Blue LED ON
Thinking
Blue LED ON
Talking
Blue LED blinks
Microphone Off
Red LED ON
